SENKEN Senken Tactical Gear Quick Wear Anti Riot Suit
Function and application:
This anti riot clothing adopts the clothing design principle, breaks the traditional structure style of anti riot clothing, and designs it into a jacket suit style.
The protective layer parts are all installed in the pocket, which is very convenient for loading and taking, and is convenient for the whole clothes to be washed in water;
The waist and legs are sewn with a horizontal hanging belt, which can be used to hang the fitting cover. The position of guard can be adjusted according to height;
Main body of anti riot clothing: it adopts omni-directional MOLLE system and Velcro, which can quickly mount the accessory sets of equipment. The waist cover is made of elastic elastic and elastic, and the belt can be adjusted to adapt to various body types.
The front and rear interior is equipped with air permeable cushion to improve the cushioning capacity and greatly enhance the air permeability;
Product application:
It is mainly used to protect the personnel during riot. At the same time, it has the characteristics of flexible wearing, short dressing time and convenient carrying.
Main technical parameters:
1. Color: navy blue;
2. The material used in the anti riot clothing is non-toxic and has no natural damage to human body. The appearance of anti riot clothing is free from wrinkle, crack, damage, gap, thread opening, needle leakage, thread end and other defects;
3. Product composition: the limb protective layer is made of engineering plastics and soft energy absorbing materials. The structure of the front chest and back protective layer is 2.0 mm thick aluminum plate overlapping layer + soft energy absorbing material, and the front crotch protective layer structure is 2.0 mm thick overall aluminum plate + soft energy absorbing material;
4. Total weight: ≤ 6.8kg;
5. Protection area: ≥ 0.86 m2;
6. Structural connection strength: fastening strength of nylon fastener: > 7.0n/cm? 2, buckle strength: > 500N, connecting belt strength: > 2000N;
7. Wearing time: less than or equal to 1 min;
8. The breaking strength of main fabric is greater than or equal to 1000N in warp direction and 500N in weft direction;
9. Stab proof performance: the front chest, back and front gear are punctured with 24J kinetic energy with standard test tools specified by ga68, and the tool tip does not penetrate;
10. Impact energy absorption performance: the front chest and back parts of the anti riot clothing are placed flat on the standard mortar, and the impact energy is 100J. The depth of the rubber indentation is not more than 18mm;
11. Impact resistance: with 120J kinetic energy impact, the protective parts are not damaged and cracked;
12. Flame retardant performance: the afterburning time of the surface of protective parts should be less than or equal to 10s;
13. After 5 times of washing, the afterburning time of main fabric should be less than or equal to 10s;
14. The elbow and knee protective parts of anti riot clothing are designed with movable structure;
15. The inner lining of the jacket (including front chest and back) is designed with cushion;
16. The side waist of the jacket, the inner sleeve and the inner thigh of trousers are designed with mesh;
17. The collar of the jacket is designed with double collar and the inner collar is made of rib fabric;
18. The size adjustment design should be designed on the position of the jacket (including the front chest, waist patch, crotch, upper arm, forearm, cuff) and pants (including thigh and leg); the sleeve length of the upper limb can be adjusted through the zipper; the length of the trousers can be adjusted through the buckle of the ribbon at the crotch, and the pants can be easily put on and off through the zipper on the leg;
19. Executive standard: ga420-2008 anti riot clothing;
FAQ:
Q1. Can I have a sample order?
A:Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the Delivery time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks according to the quantity.
Q3. Do you have any MOQ limit for every types of product?
A:Low MOQ.
Q4.Can you print my logo on the products?
A: Yes. Please inform us formally before our production and confirm the design frstly.We accept OEM/ODM for every customer, but we may have request MOQ for customized products.
Q5: DO you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products. You can get free maintenance or we can send you new for your replacement, we will refer to the real-situation. Anyway, we will responsible for it.
Q6: Are there any testing be done before shipment?
A: Yes, quality is the essence of enterprise, we have professional Q&C team who will check products one by one before goods leave the factor
Audited Supplier 
){kind=link}